Aluminum mold is the aluminum alloy template system, which is composed of panel system, support system, fastening system and accessory system. The panel system is made of extruded aluminum alloy profiles, which replaces the traditional wood formwork. With high-strength steel support and fastening system, high-quality hardware pins and other accessories, it is characterized by light weight, high strength, overall stability, convenient assembly and disassembly, and repeated use.

Formwork system: including wall slab, floor slab, beam column slab and stair, the internal corner is connected with the corner C slot through the flat panel to form the sealing surface required for concrete structure construction, so as to ensure the building structure is formed during concrete pouring.

Support system: including steel support top, diagonal support, horizontal tie rod, etc., which play a supporting role in the construction of concrete structure, to ensure the stability of the floor, beam bottom and cantilever structure. The vertical direction is to adjust the elevation accurately, and the oblique direction is to adjust the wall perpendicularity accurately.

Fastening system: it is to ensure the width of the structure when the formwork is formed, and there is no deformation, mold expansion and mold explosion when pouring concrete. It includes steel back edge, wall screw, etc. The back edge can control the flatness of the wall, and the wall screw can control the section size.

Accessory system: including pin pin, hanging formwork, tongue and groove pressing plate, drip line, etc., which are the connecting components of the formwork, so that the single formwork can be connected into a system. Hook, hammer, ash shovel, pin pin, work stool, mold remover, feed opening, hanger, mold release agent (oily and water-based). The aluminum mold panel system can meet the needs of building various building components through lofting design.

Advantages of aluminum mold

1. The aluminum formwork construction environment is clean and tidy, with less waste after construction and renewable formwork materials, which conforms to the concept of green environmental protection and can bring good social benefits. 2. The early formwork removal support system is adopted, and the construction progress of one floor in four days can be achieved through the combination of one panel system and three support systems. 3. Simple assembly and disassembly operation, low technical requirements for workers, can solve the problem of shortage of on-site technical workers. 4. The formwork has high strength and stability, and the concrete surface after demoulding has high flatness and precision. 5. Small size secondary components such as stair structural column, door and window lintel, water stop reverse side, caisson reverse sill can be formed at one time with good effect, which can effectively solve the leakage problem of external walls, doors and windows, toilets, etc. 6. Due to the improvement of the quality and accuracy of the concrete works, the external wall doors and windows can save time in the field retest link, and can be directly scheduled and installed according to the design drawings. After the external wall doors and windows are installed in advance, it provides a site for the interior decoration, so as to realize the possibility of simultaneous construction of "civil engineering - door and window installation - interior decoration" in the building, greatly reducing the delivery time. 7. Compared with traditional wood formwork, aluminum formwork has advantages in construction efficiency, construction cycle, maintenance cost, personnel requirements, machinery demand, reuse times and other economic factors. Moreover, through the recovery of residual value and the improvement of turnover times, the overall cost of aluminum mold can be equal to or even lower than that of traditional wood formwork system.