必发365

Service Hotline:0335-7168696
News
News
News

What is the spacing between upright posts of formwork support system

Time:2022-09-13 08:32:56View count:



Generally, the distance between vertical poles is 600-1200mm, and the distance between horizontal poles is about 1-1.5mm. Many of them are now arranged by experience. For details, please refer to technical specification for fastener type steel pipe formwork support in building construction.


Structural requirements for horizontal bar:


1. At the height of 200mm from the bottom of the vertical pole to the ground, the sweeping pole shall be set along the vertical and horizontal directions according to the procedure of "vertical bottom and horizontal top".


2. The top of the upright at the bottom of the adjustable support shall be provided with a horizontal bar along the vertical and horizontal directions, and the distance between the top horizontal bar and the formwork support point shall not be greater than 50cm.


3. Under the condition that the spacing between the sweeping pole and the top horizontal pole meets the requirements of the horizontal pole step determined in the formwork design, after the step is determined by average distribution, a horizontal pole shall be set at each step in the vertical and horizontal directions, and the maximum step shall not be greater than 1.8m.



必发365官网(中国)乐趣网投天天必发
必发365官网(中国)乐趣网投天天必发
必发365官网(中国)乐趣网投天天必发
必发365官网(中国)乐趣网投天天必发
网站地图网站地图
友情链接:BG大游  海博论坛  海洋之神  尊龙凯时  恒峰g22  尊龙凯时  乐虎国际lehu  尊龙凯时  尊龙凯时  和记娱乐  尊龙凯时  leyu